|
|
|
By Jay - In Northern California on Saturday, January 05, 2013 - 12:51 pm:Has anyone here used one of this units? If so how did or does it preform?
By keith g barrier on Saturday, January 05, 2013 - 01:00 pm:Jay that looks nice, I've tried to find one and can't, not even at chickasha a couple years back. Let us know how it works. KB
By Michael Deichmann, Blistrup, Denmark on Saturday, January 05, 2013 - 03:50 pm:That's the ultimative compromise!!! Now - can you show a similar compromise for the waterpump yes/no debate?
Keep them coming Jay!
By Stephen D Heatherly on Saturday, January 05, 2013 - 03:57 pm:Jay, do you have any pictures of the internals of the timer? Does it have a sliding brush?
Thanks,
Stephen
By keith g barrier on Saturday, January 05, 2013 - 05:11 pm:No compromise, just gets your timer up and easier to service, of course on the k&w you did have to replace with their parts!
By Jay - In Northern California on Sunday, January 06, 2013 - 10:44 am:Stephen, Here's what the working parts look like with the inspection cover off.
The timer ring and brush are Bakelite. If you look close the brush is stopped on the black wire position.
By Bob McDonald-Federal Way, Wa. on Sunday, January 06, 2013 - 11:13 am:Here's the American Basch that I picked a few years ago for $25.00. Haven't tried it yet.
Bob
By Bob McDonald-Federal Way, Wa. on Sunday, January 06, 2013 - 11:15 am:Can't get pic. to up load will try later
By Bob McDonald-Federal Way, Wa. on Sunday, January 06, 2013 - 12:50 pm:Lets try again.Ment Bosch clip on.
Bob
By Jim Thode Chehalis Washington on Sunday, January 06, 2013 - 01:06 pm:The timer riser in the advertizement has a much larger cover on the top then Jay's photo. I wonder if some of these timers had a centrifugal advance built into them?
Jim
|
|