|
|
|
By Daniel M. Chapasko on Saturday, January 12, 2013 - 09:53 am:Does anyone have parts for a HANDPHONE HORN. I need parts for this hand operated OOOGA horn. Can you help?
By Darren J Wallace on Saturday, January 12, 2013 - 02:49 pm:What do you need? I have some blueprints for this type of horn. 
By Nathan Bright on Saturday, January 12, 2013 - 03:36 pm:wow! ask and you shall receive!
By John Danuser on Saturday, January 12, 2013 - 05:31 pm:I need a plunger for a horn like that danuser88@ktis.net
By Daniel M. Chapasko on Sunday, January 13, 2013 - 06:28 am:I need a plunger for a plunger for the Horn I am working on. Do you have a diagram or photo of the plunger? Does anyone have a plunger?
By Darren J Wallace on Sunday, January 13, 2013 - 02:47 pm:I can take some closer photos.It might take me a bit of time as this horn is attached to my '15.I'll see what I can get to and photograph the plunger and diaphragm.I can draw up some dimensions too!
By Darren J Wallace on Sunday, January 13, 2013 - 02:49 pm:I also can make these parts as I have my own machine shop if that is of some help.
By Darren J Wallace on Monday, January 14, 2013 - 05:27 pm:Is it just the plunger top(large round section) you need dimensions/photos for, or the square rack/shaft it attaches to as well?
I will have to take my horn apart to photo it and provide dimensions.It's one of the parts i didn't draw up when I had mine apart
I don't mind doing it if this is what you need.
By keith g barrier on Monday, January 14, 2013 - 07:08 pm:Daniel, I think I have a horn like that, most of the tag is gone but if you have pictures of the parts I might be able to match it up. The one I have is very rough but I think the plunger would be usable. KB
|
|