|
|
|
By ken bechtel on Saturday, January 19, 2013 - 06:59 am:Hi all! Can anyone identify these bolts with safety wire? I bought a lot of new hardware from Langs and the small clear bags usually have a part# on them. thanks. Ken 
By Roger Karlsson, southern Sweden on Saturday, January 19, 2013 - 07:08 am:Flywheel bolts holding the transmission to the crank shaft?
By ken bechtel on Saturday, January 19, 2013 - 07:18 am:Thanks Roger! Ken
By Larry Smith on Saturday, January 19, 2013 - 10:42 am:I don't think so. Flywheel bolts have the safety wire holes drilled in two places. They might be for the field coil to the block, but without any specs, it's difficult to tell.
By Doug Money - Braidwood, IL on Saturday, January 19, 2013 - 12:16 pm:Maybe this will help.
By Doug Money - Braidwood, IL on Saturday, January 19, 2013 - 12:18 pm:Oops, now that I'm looking at it, I guess not. Sorry.
By John Aldrich Orting Wa on Saturday, January 19, 2013 - 12:39 pm:Great resource!
By Steve Jelf, Parkerfield KS on Saturday, January 19, 2013 - 12:45 pm:One caution about the chart: those are wrench sizes, not thread sizes.
By Doug Money - Braidwood, IL on Saturday, January 19, 2013 - 05:49 pm:This may not help either.
By Doug Money - Braidwood, IL on Saturday, January 19, 2013 - 05:53 pm:I have a pdf with a list of 22 pages of bolts and fasteners for the entire car. I haven't read it cover to cover so I don't know if it is complete. No way to post it here because it is pdf. Send me an email if you want a copy. dougm11455@yahoo.com
By Christopher Kramer, Woodstock, Ontario on Saturday, January 19, 2013 - 10:06 pm:Magneto coil mounting bolts.
http://www.modeltford.com/item/3250BS.aspx
|
|