Going to run the Snow Bird.

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2013: Going to run the Snow Bird.
Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob McDonald-Federal Way, Wa. on Friday, January 18, 2013 - 11:20 am:

Leaving to go to my sons in Eastern Wa to try out the Snow Bird this morning, wish me luck. Hopefully pictures this afternoon.

Bob


Top of pagePrevious messageNext messageBottom of page Link to this message  By Dave Dufault on Friday, January 18, 2013 - 11:27 am:

Good Luck !




Top of pagePrevious messageNext messageBottom of page Link to this message  By Gary Schreiber- Aiken, SC on Friday, January 18, 2013 - 11:36 am:

looking forward to the pics Bob!


Top of pagePrevious messageNext messageBottom of page Link to this message  By George Button III (Chip), Lake Clear, NY on Friday, January 18, 2013 - 11:39 am:

Good Luck and have fun!!....Chip


Top of pagePrevious messageNext messageBottom of page Link to this message  By Tom Carnegie on Friday, January 18, 2013 - 11:59 am:

Where're you gonna be?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Christopher Lang ~ Brentwood Bay, BC on Friday, January 18, 2013 - 02:07 pm:

I look forward to the Pictures, I really like that machine!!


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jay - In Northern California on Friday, January 18, 2013 - 02:11 pm:

NEAT!!!


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob McDonald-Federal Way, Wa. on Friday, January 18, 2013 - 08:23 pm:

Dave
uncross you're fingers, it didn't help.
First drove 65 miles to Easton Wa. Pulled the trailer out of the shop and it would not start.
recharged the bat. tried starter fluid, got back fires, no start. pulled the timer and found it broken,little spring laying in the timer cover and the roller bent out of shape. It was running when I put it in the trailer last week and has been sitting there sense. can't figure it out unless the rough road ride did it.New timer on order monday and will go back in a couple weeks, hope the snow stays until then.
OH and for pictures I took the camera out and it said no card,it was still in the computer from last up load.
NOW THAT'S MY STORY AND I'M STICKING TO IT.
If I didn't have bad luck today I wouldn't have any luck at all.

Bob(with nose out of shape)

O O
!
\---/


Top of pagePrevious messageNext messageBottom of page Link to this message  By Dave Dufault on Friday, January 18, 2013 - 10:10 pm:

Shucks !


Top of pagePrevious messageNext messageBottom of page Link to this message  By Christopher Lang ~ Brentwood Bay, BC on Friday, January 18, 2013 - 10:48 pm:

Foiled again!


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob McDonald-Federal Way, Wa. on Saturday, January 19, 2013 - 12:04 am:

Never say die,IT WILL BE OUT AND RUNNING just a little set back.

Bob


Top of pagePrevious messageNext messageBottom of page Link to this message  By mike conrad on Saturday, January 19, 2013 - 05:53 pm:

Bob, what's this all this waiting a week for parts nonsense, next time call a friend, warning! it may cost you a ride if I had to deliver the parts.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob McDonald-Federal Way, Wa. on Saturday, January 19, 2013 - 09:17 pm:

Mike
Just got back from Steve Tomaso with all I need. The old timer was the old style jap one with the orange insulator and the roller assembly was brass or copper and nether of us have ever seen one that had gotten bent like this one.It must have started years back and just got to the never work again state after the rough trip on I-90's right lane over the pass. You know the right lane before you get to Easton.
yikes.
If your T won't start check your timer.

Bob


Top of pagePrevious messageNext messageBottom of page Link to this message  By mike conrad on Saturday, January 19, 2013 - 09:42 pm:

Well Steve is a good friend. So good job!! I'm always off sat. Thru mon. So if you end up running this contraption on a weekend and you don't mind company I would drive to easton and meet you for a ride. Give me a call.


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration