Engine pan arm wood

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2013: Engine pan arm wood
Top of pagePrevious messageNext messageBottom of page Link to this message  By kenny on Monday, January 21, 2013 - 06:40 pm:

i have 1924 fordor do i need engine pan arm wood and where do they go 2 of them.


Top of pagePrevious messageNext messageBottom of page Link to this message  By john kuehn on Monday, January 21, 2013 - 06:48 pm:

They go between the frame and the pan arm. Its best to have them in place as Ford intended.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Larry Smith on Tuesday, January 22, 2013 - 09:40 am:

There should be a little drag on them when you install them. I usually use a sawed off broom handle to pound them in, and then center them with a taper punch. I believe by '24 they were using the square ones, not the earlier style.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Chris Barker, Somerset, England on Tuesday, January 22, 2013 - 10:32 am:

.....and DON'T tighten the horizontal bolt which passes through them; just nip it up. This was Ford's recommendation to lessen the incidence of cracking and breakage of the arms. Use a self-locking nut unless you really think you can insert a split pin down in that narrow hole!


Top of pagePrevious messageNext messageBottom of page Link to this message  By kenny on Tuesday, January 22, 2013 - 11:48 am:

Where do they go or where can I get a picture of placement .


Top of pagePrevious messageNext messageBottom of page Link to this message  By Dan Treace, North FL on Tuesday, January 22, 2013 - 12:02 pm:

Between the crankcase arms and the inner frame rail.







Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration