Set of 9 wood frame build sheets for 1921 to 1925 touring body with 3 panel rear section. Shows both the steel and wood rear door hinge post and front seat mount for 2 man top. Included are (3) 8 1/2 X 11 sheets with floor board dimensions. These appear to be original not copies.
$70.00 plus shipping.
Pay-pal or money order.
Click on my name and send me a message if interested.
The notch on the wood sill for the right front door latch post was off 1/4 inch on the plans I used. Mel may have corrected it on later sets. Check it out before you cut the sill.
When using the prints you have to go by your sheet metal. Ford had other vendors making bodies and they can very some. A lot of people have a mix of metal when re-wooding their T. I have had very go luck with the prints on the bodies I have done by checking my metal to the measurements on the prints and then cutting my wood out. You have to think like you are making a custom body.
I am curious Mark. What does Bump mean? Also what does Bump-ity-bump mean?
when you type "bump" or anything, it just gets the post back to being close to the top of the forum page for more views.
William's correct. I was just having fun!
Great, now I know. Keep having fun. :-) and a very good day.