Touring wood plans by Mel Milller 9 sheets 1921 to 25

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Classifieds: Touring wood plans by Mel Milller 9 sheets 1921 to 25
Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Saturday, March 22, 2014 - 05:17 pm:

Set of 9 wood frame build sheets for 1921 to 1925 touring body with 3 panel rear section. Shows both the steel and wood rear door hinge post and front seat mount for 2 man top. Included are (3) 8 1/2 X 11 sheets with floor board dimensions. These appear to be original not copies.
$70.00 plus shipping.
Pay-pal or money order.
Thanks
MarkG
Click on my name and send me a message if interested.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ted Dumas on Saturday, March 22, 2014 - 11:46 pm:

The notch on the wood sill for the right front door latch post was off 1/4 inch on the plans I used. Mel may have corrected it on later sets. Check it out before you cut the sill.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Saturday, March 29, 2014 - 05:34 pm:

Bump


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Saturday, March 29, 2014 - 11:47 pm:

http://s1101.photobucket.com/user/redmodelt/library/Mel%20Miller%20plans?sort=3& page=1


Top of pagePrevious messageNext messageBottom of page Link to this message  By Leon Parker on Sunday, March 30, 2014 - 04:31 pm:

When using the prints you have to go by your sheet metal. Ford had other vendors making bodies and they can very some. A lot of people have a mix of metal when re-wooding their T. I have had very go luck with the prints on the bodies I have done by checking my metal to the measurements on the prints and then cutting my wood out. You have to think like you are making a custom body.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Friday, April 11, 2014 - 06:09 pm:

Bump


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Friday, April 25, 2014 - 12:23 pm:

Bump-ity-bump


Top of pagePrevious messageNext messageBottom of page Link to this message  By Albert Belling on Friday, April 25, 2014 - 01:54 pm:

I am curious Mark. What does Bump mean? Also what does Bump-ity-bump mean?


Top of pagePrevious messageNext messageBottom of page Link to this message  By William L Vanderburg on Friday, April 25, 2014 - 02:32 pm:

when you type "bump" or anything, it just gets the post back to being close to the top of the forum page for more views.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Friday, April 25, 2014 - 07:23 pm:

William's correct. I was just having fun! :-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By Albert Belling on Friday, April 25, 2014 - 07:49 pm:

Great, now I know. Keep having fun. :-) and a very good day.


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration