I was originally planning on skipping Hershey this year, but I'm starting to weaken and reconsider.

Anyway, please post your swap spots and any special items you plan to offer here in this thread so that folks can mark up their maps and find you.

Here is a link to maps of the various fields:

http://hershey.aaca.com/eastern-division-fall-meet/maps-more/

RJ&L VINTAGE WIRING SUPPLIES CN64-66

cloth covered spark plug wire, cloth covered 10ga,12ga,14ga primary wire, asphalt loom, etc..

I bet everyone here knows my spaces by now, but here they are again CR 33-38. Thanks, Dan

I see from another post that Lang's will be at spaces RCF 38-43 AND RCG 38-43.

Leather License Plates
Also, don't forget Free Cookies & Sodas on Thursday morning at 10am. RED Field, 4 aisles south of the HCCA HQ Tent, spaces RWG 30-31, near lamp post #21.
Hope to see you there, same space for the past 6 years.

I'm in the usual spots, GCC 5,6 in front of the Giant Center almost across from the crab-cake vendor. Will have some brass lights, clocks, interesting automobilia, some early lit, and who knows what else we might decide to part with. Might be out shopping when you drop by but do try and catch us there to say hi. Don't forget to bring some old spark plugs!
Terry

RSA 88-90, south of the stadium on the easternmost edge of the meet. 8 AM to 4:30 Tuesday through Friday; 8 to 11 Saturday.

My brother will be there in the Packards area.
Spots GBE 26-27
We have all the T bearing pouring equipment, KR Wilson block
jig, rod jig, melting pot & cooker, boring bar and reamers.
3 nice wire wheels (I may find a 4th), wire wheel hubs.
Several windshields, I'll get some pics of them, 3-4 are T, a couple are 21 back and at least one is newer style.
A couple I think are V8 and maybe Model A.
Lots of stuff, a whole trailer load of 90% T parts.

Ask for Dan and tell him Dave sent you.

Thx for setting up this post! I have just decided that this year it will be - my first visit to Hershey - and my som have told me that he will happily join me.
So I will use this post to make a plan for who to visit.

Are we going to have a Forum meet again this year? It was kinda neat meeting every one last time. Jim

See the I-Timer Ideal Timer, E-Timer Electronic ignition and ECCT Electronically Cranked Coil Tester; Chocolate Field (C2A 61,62) Coil testing and tuning demonstrations. Take advantage of show specials while supplies last.

Stop by and say hello!

We are doing Hershey a little different this year. Go to www.bigflatsrivet.com to check us out. c4j-28 under light pole #41 Big Flats Rivet Co.

C4A16-18 with my ‘13touring and misc T parts.

I see from another post that the MTFCA tent will be at spaces C4Q 34 to 37.

Can someone from MTFCI confirm where their booth will be?

We will be in C4N 31-32 with our NOS ignition parts. We can fit most makes and models from 1910 to 1960 with dist caps, rotors, point sets, condensers, brushes etc. I will have several Thomas rotors with me this year.

I will be in Chocolate Field South, space CI 8; there will be a “Crosley” sign on the tent (and no, I’m not going over to the ‘small’ side). I will bring ’12 chassis parts and brass that I was saving for a project that I will probably never do. Also assorted early parts.

TTT

I'll be at my usual spaces over at OAI 21-23 with more T junk.

bump

I'm at GAG and GAF 27-28 (Green field) with lots of NOS T stuff including over 60 various NOS Ford script side curtains (1915-1927) and many rebuilt and tested T carbs, both original and aftermarket. Carbs include rebuilt Stromberg OFs, NH straight throughs, Simmons Straight throughs, a NOS Van Briggle, regular NHs, Kingston 4-balls and Kingston Ls. I'll have lots of nice ignition, transmission and differential parts as well. Drop by for a chat if you have time.

Russ Potter will be set up in the Red Field at RWI 31-33. Stop in and say hello!

Sure looking forward to seeing Russ there again

According to the latest Model T Times, the MTFCI tent will be in a new location in the red field, spaces RCM 24/25.

TTT

From the HCCA forum:

"We are doing Hershey a little different this year. Go to www.bigflatsrivet.com to check us out.

c4j-28 under light pole #41 Big Flats Rivet Co."

(Message edited by cudaman on September 17, 2018)

Will be in Chocolate field near the walkway overpass to the Giant Center.

C4A 19-21

T parts, mostly small stuff, set of four T wire wheels and hubs, set of four '26-'27 touring doors.

Extra folding chairs, and some peanuts in the shell as you rest your heels

TTT

Lang's Old Car Parts will be the same place as usual! RCF 38-43 AND RCG 38-43. Only pre orders for reproduction parts but we will have some good used and NOS treasures from Don's stash!

Bump

Will be in the chocolate field right behind Jim Dixs,C4I 29-31 light pole 41, stop by I am sure there will be a Beer there some where.

I will be at C4W 40-46 with 2 Ts for sale;
1926 coupe with hyde suspension and a 1923/11 torpedo roadster with a warford transmission.
also available 1927 touring and 1913 touring
stop by for a chat

We'll be behind the stadium in spaces RSE 29-31.

We'll have: a 26-27 Ruckstell w/ driveshaft, Late 1912-early 1913 B-series engine block, 1913-14 rear axle housings, used brass radiators, 26-27 wire wheels with hubs, nice square fellow wheels, nice fenders, 13-14 carbide generators, and much more.

I mentioned that I'll be in spaces RSA 88-90 but neglected to tell what I'll have with me. Will have rewound mag field coils (no double stacks, but can orders for them), early coils and parts, top straps and hardware, correct new early spindle bolts, running board/fender bolt/nut sets, 1909-25; other correct fasteners, and pretty much most of the more than 200 parts I make for the Model T and horseless carriages.

C4A16-18 with my ‘13touring and misc T parts. I'm already listed above, but I thought I would elaborate:

1913 Rootlieb rear fenders, excellent condition
later front fender irons
1925 original hood, complete very good original condition
High honeycomb radiator, needs repair
rear spring, good condition, rebushed
2 26-27 demountable tire rims
3-4 boxes of early-mid teen engine, drive train stuff.

We just loaded more stuff....a bunch of steering columns-1913-17, NOS fenders, aluminum hoods, set of 21" wheels and rims, T engine stand, aluminum transmission cover, bunch of 13-14 lights, other brass, and putting more in the trailer all the time. Behind the stadium RSE 29-31, setting up Tuesday morning.

Cj 71-73 some T parts and A parts. Old bicycles and Alot of signs,cans

http://www.mtfca.com/discus/messages/822076/902604.html?1538431993

BTT

Classic and Vintage Bulbs. He is going to be at Hershey at C4R 12.

posted by Dave Young

Hershey Specials on extra new parts at considerable discount over current pricing. Also, used parts, mostly for 11-12.
Orange - OBM 29-32

Update on my brother. Still spots GBE 27-28, he'll be driving an Allen Kieth construction box truck. We loaded it up today
I put on a nice 26-27 hogshead with pedals and the clutch lever.
A good set of 4 wire wheels, set of 25 back wire hubs.
A decent brass radiator, 1910, 11, 17 and up Ohio license plates, some pairs. A box of various state plates from the 60s back. Coils that the old man had set and marked good, set up with an Allen Electric HCCT. Lots more.
I put a front and rear dismountable wood wheels, unrestored and one rim on.
4 purple headlight lenses...

He doesn't want to haul much home, if you know what I mean !

Folks up near the old Hershey Arena may be interested to know that Hersheypark announced a major expansion yesterday called “Chocolatetown”. It isn’t exactly clear, but from the artists renderings it appears to me that it will occupy at least some of the parking lot at the corner of the arena. It’s essentially moves the entrance to the front of the park with shops, a restaurant and a new roller coaster.

It’s supposed to open in the Summer of 2020 so there may be some impacts during construction for next year as well.

http://www.hersheypark.com/chocolatetown/

Anyways, don’t mean to be a downer, just thought folks would be interested. Enjoy the show and pray for good weather!

P.S. Expansion by Hershey like this is inevitable and this is just the beginning. The will also be expanding over to the old golf course across the road that used to go behind chocolate world. I still recall going to Hershey Region meetings as a kid and hearing them discuss buying their own property to hold the meet. This was when it was still all fields around the park. It was a concern then. Interestingly enough, the show seems to have shrunk at the same rate that Hershey has built up the property.

Here is a pic of my spaces, watch for this trailer.


Spaces CR33-38. Light Pole #68 Dan

wood wheels, rims, front and rear springs
RCC 54

Spaces RCC 33&34 I will have :1early frame (no battery mounting holes)with 4 loose not attached to the frame running board brackets that go with
1-early(tapered) front ( loose leaves)and 2 tapered rear springs.
2-early front axels “over the axel spring perches “with very good spring perches one with very good threads and the other not so good but usable threads both with a correct connecting rod.
1-set 1915 rear axel (both halfs) housings
1 set (3) 1914 kerosene lights 2 side 1 rear
4 Good usable rear bearings ,tight cages 1/2” rollers
1-15 hogs head
2 early front hubs and 1 rear hub -Excellent threads on all hubs
3- Holly Gs 3 screw all with no dented bowls
1- very nice 3 dip engine pan
2- restored mag horns
1 later compleat Front axel (clipped ends)
1-later rear spring ( clipped ends)
1-6 bladed fan
Several very nice spindles
Along with other smaller items ,trans bands,Ford specal speedometer road gear,cast intake manifold, round gas tank mounting brackets,very nice high head...and more stuff I forget after loading the truck
Round fellow wheels complete with hubs (front and rear)
Rear axles
I will also have a Model T based fire truck hose bed complete with cast iron ladder hooks- one side single ladder hook the other side hooks for a extension ladder all in VERY good shape also part of the sale of fire equipment will be a expanded wire basket 30”x30” x 14” high,correct model T size wire chemical hose basket for American
LaFrance fire trucks. Also assorted ALF ladder hooks.
I don’t have room to store these items so price are negotiable especially if I am still sitting there on Friday with a lot of stuff

Bump, getting close!

Classtique Upholstery will be in the Chocolate Field space CP 4 (as posted on their Facebook page).

When is Hershey again?

Willis

Pennsyltucky...

Added to the load...
2 axle shafts. VG
5 more unrestored wheels and rims, including:
3 front 30X3.5
1 rear. " " "
1 solid wood without hub

It starts Tuesday, correct ?

We've added more.... Some 1913-14-15-16-17 steering columns, 1950's Simplex motorcycle, missing engine. Several sets of touring top irons, 1917-22, 1923-25, and 1926-27.
RSE 29-31, behind the stadium.

Officially, it starts Wednesday, but apparently early birds can get a head start on Tuesday (I have never tried it).

I will be at my usual spot in the Chocolate Field. Spaces CI 59 - 62. I have a variety of stuff. Stop by and say hello and we can talk wheels.

I was told that next year that Hershey Amusement Park is expanding and will be taking some of the fleamarket field away do there is going to be some moving the vendors around

RJ - see my post above.

Thanks Dan I was in Carlisle just arrived in Hershey today at noon at the campground for a 2 day layover before we settle in tues on chocolate field

Enjoy your time! Tomorrow would probably be a great day to check out the local AACA museum if you have not had a chance.

bump!

I`m so excited going back to Hershey with my Dad. We missed last year because my Dad had an open hearth surgery with 4 bypass. Now he`s in good shape and I`m so glad spending great time with him this year. see you there MTFCA members and model T lovers.

Mario