Anyone tried Evapo-Rust?

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2010: Anyone tried Evapo-Rust?
Top of pagePrevious messageNext messageBottom of page Link to this message  By Robert E. (Bob) Blackbourn, Gautier, MS. on Friday, September 24, 2010 - 02:43 pm:

http://www.evapo-rust.com/


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ed on Friday, September 24, 2010 - 03:01 pm:

I use it all the time. Works as advertised.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Robert E. (Bob) Blackbourn, Gautier, MS. on Friday, September 24, 2010 - 03:25 pm:

Thanks Ed,
I may try their "paper towel and plastic sheet" method on some of my sheet metal. Perhaps old bed sheet and plastic drop-cloth!
Bob


Top of pagePrevious messageNext messageBottom of page Link to this message  By David ONeal on Friday, September 24, 2010 - 04:15 pm:

Yup....I have used it and it works good.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Paul Grohsmeyer on Monday, September 27, 2010 - 10:26 am:

Excellent stuff. 24 hours will make it like new.

PDG
1917 TT Wrecker


Top of pagePrevious messageNext messageBottom of page Link to this message  By Tim Puckey, Chagrin Falls, OH on Monday, September 27, 2010 - 11:48 am:

The gas tank in my car was a mess when I bought it. The car hadn't been run in a few years so I removed the tank, cleaned it, used Evapo-Rust purchased from Tractor Supply, and re-installed it. I've had gas in the tank for several months now and last week I drained some into a bottle to check and it was crystal clear with no trace of sediment or rust. So far so good.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jason Given - St. Paul, MN on Monday, September 27, 2010 - 12:45 pm:

I used it on a lot of my T parts. The only tool I really used an old toothbrush.

It works really well. Most of the time I just dropped a part in my bucket of evapo-rust and came back the next day and the rust was gone. Afterwards I would wash them down (water) and dry them off with a towel.

I cleaned all the old nuts and bolts just incase I wanted to reuse them or for a reference to get new ones and they have not rusted at all this summer.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Frank Harris Big Bear Lake, California on Monday, September 27, 2010 - 01:48 pm:

Evaporust sells for a lot of different prices at different stores. Five gallons is $89.99 at one store and next door it is $103.33. gallons are $20 and $33, so watch where you go. You can mail order it over the internet but you must pay shipping on top of their retail price which is the same as Kragen-O'Reilly sells it for.

We tried it at a Model T Club show and tell dog and pony show meeting night but it didn't do much of anything in an hour, it did discolor the washing off water so it had started to remove the rust from a very rough nut and bolt that were rusted together.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Fred Dimock, Newfields NH on Monday, September 27, 2010 - 03:58 pm:

What ever happened to using Coca Cola to remove rust?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Fred Dimock, Newfields NH on Monday, September 27, 2010 - 04:00 pm:

Woops --I know!

We can't use Coca Cola for rust removal until we run out of rum!


Top of pagePrevious messageNext messageBottom of page Link to this message  By Dolores Fillman, Edinburg,Tex on Monday, September 27, 2010 - 06:59 pm:

Thanks for the thread, I just bought two old gas cans that will need cleaning out.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Adrian Whiteman, New Zealand on Monday, September 27, 2010 - 08:13 pm:

Works OK, but some mixed results from 'like new' to 'use the sand blaster' - (with fresh stuff as well).


Top of pagePrevious messageNext messageBottom of page Link to this message  By paranoid in Pairoa on Tuesday, September 28, 2010 - 12:19 am:

Never heard of it, Wish i had known of its existance. From reading what you guys have said it looks like i should go find some.


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration