|
|
|
By tom leroux on Sunday, June 12, 2011 - 09:48 pm:did anyone make a water pump-oil pump for a t
I would like to find one
By Les Schubert on Sunday, June 12, 2011 - 10:23 pm:Yes Good luck finding one!!
By Dan Treace on Sunday, June 12, 2011 - 10:29 pm:Green Engineering 'Triple Front Plate'
Water pump, oil pump and distributor all in one.
rare, have only see the advertisements!
By Terry A.Woods on Monday, June 13, 2011 - 01:37 am:I have seen one in the last year on Ebay. It was a waterpump/oil pump, but not a distributer; mounted in normal water pump location. Seller stated that he didn't know whether it worked, that it might be more of a conversation piece, so I didn't bid. I'll agree with the others; you may look a long time before you find one. If you have a water pump that has a shaft protruding out the rear of it; I've got a brand new Teal pump and pressure relief valve that could be adapted to it.
By Jerry VanOoteghem on Monday, June 13, 2011 - 01:13 pm:There was a company called Stark that made one. It was a normal looking water pump but also had a vane type oil pump "floating" on the same shaft that went into the water pump impeller. Sometimes the Stark name was shown as a star symbol followed by a "K". I have a couple.
By don h ellis on Wednesday, June 15, 2011 - 10:30 am:here is a Stark. It appears to work.
By Erich Bruckner, Vancouver, WA on Wednesday, June 15, 2011 - 10:41 am:Don, can we see more shots of the oil pump section? I cant see how it is plumbed.
By don h ellis on Wednesday, June 15, 2011 - 11:08 am:here you go
By Steve McClelland on Wednesday, June 15, 2011 - 11:30 am:I have a small used after market brass externail oil pump it requires two copper lines one pickup and one return, the pickup would be in the lower part of the pan and in most cases the return is always located up near the #1 rod area in the side of the pan. If you need this let me know
I don't plan on useing it right now..
|
|