Do any of you fellows know where the moulding (trim)shown in these pictures can be purchased? A friend needs it for his '23 Coupe. It covers the areas where the body panels come together.
Restoration Supply Company, here is what I have on them:
In Restoration Supply Co. Catalog #26, page 23 lists Aluminum T molding with a .035 step head; 7/8" leg; 8 ft. lengths only. Web is .094" width 3/4". Part no. MOU035 $34.00
Phone: 1-800-306-7008 The company is re-located in Escondido, Calif.
Thanks Ted! That looks exactly like it.
I am looking for the same moulding. It is flat, 3/4 x 3/16. Same vendor part #MOU032 for $36. 80. I have seen it on-line but usually has countersunk holes every 6". It should be available somewhere without holes and cheaper. It would take 3 - 8' lengths to do a coupe. I believe these were nailed on and the screw holes would just cause problems.
The T moulding is for the door edges. The flat is for the seams between the panels.
Someone should know if this is available.
Rich