has anyone ever installed a bronze bushing in the ball cap? thanks . ken
It won't work.
If its worn a bit - Royce suggested a piece of greased leather to me for a shim, Langs also provides a tip saying a freeze plug works as a shim, but the best I think is the Apco ball kit from Snyders. But then again, a bronze shim might work.
John, a Ball Cap goes on the Transmission tail shaft!
Steve - your on fire today! lol
Greg, what Steve really done there is took his ball cap, and quickly covered up his Ball Bearing Ball Cap!
Steve - that looks to be an engine from 19-25. If so the color is wrong on the ball cap.
Well, excuse me - he didnt specify wishbone ball cap or tail shaft ball cap - I stand reproved
Tail shaft ball cap! thanks. Ken
I had my ball cap done with bronze bushings. I am a few hours from having it all out after 2000 miles (cracked reverse drum), so I may take some pictures tomorrow.
Babbitt is forgiving, Bronze is not.