Transmission ball cap screw size

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2012: Transmission ball cap screw size
Top of pagePrevious messageNext messageBottom of page Link to this message  By Robert E. (Bob) Blackbourn, Gautier Ms. on Wednesday, May 02, 2012 - 01:36 pm:

Having a problem identifying the thread for the two bottom screws. I know I should have tried it before putting the engine back in the chassis :-(
Thanks in advance,
Bob


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ted Dumas on Wednesday, May 02, 2012 - 01:48 pm:

3/8-24 NF


Top of pagePrevious messageNext messageBottom of page Link to this message  By Robert E. (Bob) Blackbourn, Gautier Ms. on Wednesday, May 02, 2012 - 02:01 pm:

Thanks Ted. Much appreciated.
Bob


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ken Todd on Friday, May 04, 2012 - 11:01 am:

Don't forget that they should have drilled heads and be safety wired together. The top two bolts should have castelated nuts and be cotter pinned.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Larry Smith on Friday, May 04, 2012 - 11:31 am:

And, don't forget to get them as long as possible. I think the length should be about 1 1/4".


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration