Value of a motor

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2012: Value of a motor
Top of pagePrevious messageNext messageBottom of page Link to this message  By Dennis Brown on Tuesday, May 08, 2012 - 01:46 am:

What should a complete 26 motor be worth? Turns over?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Terry Woods, Katy, Texas on Tuesday, May 08, 2012 - 08:44 am:

I sold three of them about five years ago for $200. each. I could have parted them out for more but then I'd had labor time in them and I might have been stuck with unsold parts. I needed to dispose of them quickly and forgot one was a 27 serial number that I planned to use. Then I had to spend $200. on a 27 bare block that had to be sleeved. Ouch.


Top of pagePrevious messageNext messageBottom of page Link to this message  By John Danuser on Tuesday, May 08, 2012 - 09:01 am:

I can't touch a 26-7 motor/trans here for less then 450-600.00 stuck or otherwise


Top of pagePrevious messageNext messageBottom of page Link to this message  By Fred Miller, Sequim WA on Tuesday, May 08, 2012 - 01:34 pm:

Unknown condition but will still turn over, sell around Seattle for $250 or less. That is for the 26-27 engines. Other later engines can be found for $100 to $200 around the NW. Stuck engines not so much.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jerry Ostbye on Tuesday, May 08, 2012 - 03:52 pm:

Fred I am looking for another complete 26' engine if you know of any around here.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Fred Miller, Sequim WA on Tuesday, May 08, 2012 - 04:54 pm:

Jerry a Complete Engine is a little harder to find but I have seen them around. Send me a PM so I can have Your Email and PH# then I can Call you when I find one. Fred


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration