need a source for a grose jet float valve for a kingston 5 ball. it appears to have a 5/16" thread.
it currently has a 2 ball float valve in it that is sticking. need to replace, but can't find a source for this particular one. thanks in advance for your help.
The Kingston works best with a Quadrajet valve. It has a spring to lift the valve from the seat. The two ball valves are actually working against the flow of fuel.
Steve
I'm outa my league here (since I don't own one) but I have seen a LOT of posts on this board about continuing problems with the Grose Jet ball float valve.
Perhaps a keyword search to find these posts might convince you to consider an alternate valve system.
Just my $.02
Cheers
schuh
That 2 ball float valve you currently have is a Grose Jet. A new one will work just like the one you have.
okay.....grose jet valves are gross...got it
now, where do i get a quadrajet valve, or an original valve?
thanks
http://www.modeltford.com/item/RM2.aspx
All the information you need will be in this book.
got it....on order...thanks