Now that the weather has warmed time to replace the top on my 1915 roadster. Any helpful hints would sure be appreciated. Bows are in good shape and covered. It's where to start first with the top and back material.( I have a kit from Lang's.) Thanks Bill
Bill, First thing to do is lay it all in the sun,to make all plyable.
Find the center of the rear bow, the center of the seat back, make some measurements, and go from there.
I believe the rear bow should be about a inch or two outward of the rear of the car. Give the Search Function a try, and you'll come up with some pointers.
The back piece goes on first then the top piece.
Good luck. The kit you have, well the instructions can be hit or miss.
Bill,
Take a look at this link from 2007. John Regan has some good measurements for you to use.
Also, this picture might be useful to you.