the rear wheels on my T were redone many years ago and had the hub bolts replaced with standard carriage bolts.
the heads on these are much larger than the originals and they must be weaker because a few of them have broke.
what im wondering is if the reproduction hub bolts are of the same style and strength as the originals or if they are just carriage bolts.
The ones made by R.V. Anderson are what you want. They're correct.
RV Anderson
3515 Route 62
Kennedy, NY 14747
716-267-3526
RVMODELT@NETSYNC.NET
Thanks for the recommendation, Steve. Our bolts are Grade 5 (unmarked), full body diameter, rolled thread, with a small diameter, high crowned head. They have at least twice the tensile strength of the originals. I can sell you the bolts, but if you need the nuts too, buy the whole set from one of the vendors. They can buy the nuts for a lot less than I can.
They are also available in the length for the Rocky Mountain brake setups.
well good! thankfully sombody is making them, the carriage bolt just doesnt look right.
if i may ask how much do you ask for a set to do 4 wheels?