Since I am using a car chassis my TT is not quite a Ton Truck (TT). I will refer to it jokingly as a 1/2 ton truck. or 1925 1/2-TT. May be I should call it a Light Delivery, or a Doctors Truck?
Previous thread..... http://www.mtfca.com/discus/messages/257047/309299.html
I installed the steering column. Once again the holes did not fall in the correct location. I needed to drill new holes approximately 1-inch forward of the 26-27 mounting position. I did need to use a couple of washers under the front of the bracket to maintain the proper angle and prevent binding.
popjpeg{310932,steering2}
The rear of the cab in now bolted to the chassis. I welded a length of angle iron between the outboard braces and bolted it directly to the chassis. Simple and effective. The cab is now bolted to the firewall in front and the chassis in rear.
Howells sells that back lower panel for the TT sq cab
Thanks John. I have the panel. It needs to be straightened and I removed it to better see what I was doing.