26 Roadster Top Iron Dimentions

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2012: 26 Roadster Top Iron Dimentions
Top of pagePrevious messageNext messageBottom of page Link to this message  By Dennis Brown on Sunday, October 14, 2012 - 12:15 am:

Would anyone have the lengths of the metal pieces for a 26 roadster. I have miscellaneous top iron parts but not sure if they will fit my T. I am also wondering on lengths for a 23 roadster. Thank you.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Hap Tucker on Sunday, October 14, 2012 - 05:02 am:

Dennis,

I do not have the measurements for the 1926-27 cars. But you also asked for the 23-25. Phil Mino shows some excellent photos with measurements for the 1923-25 USA runabout/roadster top. See: http://fordfarm.net/23-5RdTopSockets.html

You are living in Oregon -- so you are more likely to run across parts that were for a Canadian Model T than those further away. Ford of Canada introduced the one man top approximately three years before the USA. But they changed the top bows several times before they finally settled on the design they liked. So “if” you have any one man top Canadian top bow pieces or for that matter one man top bow pieces from another make of car or accessory maker, it can cause some confusion.

Good luck with your project.

Respectfully submitted,

Hap l9l5 cut off


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jim Thode Chehalis Washington on Sunday, October 14, 2012 - 12:31 pm:

Dennis,
You will find the 26 - 27 dimensions here:
http://www.mtfca.com/discus/messages/179374/183704.html?1295291207

Jim


Top of pagePrevious messageNext messageBottom of page Link to this message  By Hap Tucker on Sunday, October 14, 2012 - 06:33 pm:

Jim,

Thank you for posting the 1926-27 roadster dimensions.

Respectfully submitted,

Hap l9l5 cut off


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration