Hi Guys,
I make this LED Brake Light that helps keep vintage vehicles like the Model T safer. It operates from 6 or 12 volts, positive or negative ground. It has also been made to be easily removable so you can take it off during a show.
http://www.brakeflasher.com/brake_al.htm
Please let me know if you have any questions.
topserve@tm.net
Thanks,
Emil
That sounds like a REALLY good idea!
It is a really good idea, but you can make your own for under $10 - probably under $5.
Hmmm... Well I sell a lot of these for race cars and a lot of them to the local T guys and gals..
https://www.pegasusautoracing.com/productdetails.asp?RecID=5603
I also make an acrylic style 10 LED light that attaches to the inside of the rear window. It too operates from 6 or 12 volts.
http://www.brakeflasher.com/brake.htm
Last summer I met a fellow that had a strip of LED lights that ran between the top and where the body met. If you didnt know they where there you not have been able to see them without them coming on..They were stop, tail and signal. He said they came from the fire service