I am in need for body molding that covers the back half of the car... If any one can help IT will BE appreciated Thanks blake
blakeericksen1@frontier.com
989-681-5969
I don't know the answer to your question, but somebody probably will. I just wanted to say welcome to the affliction. Here are a couple of links I like to post for new T owners.
http://dauntlessgeezer.com/DG80.html
http://dauntlessgeezer.com/DG79.html.
I bought aluminum molding from restoration supply for my '22 coupe a few months ago and they worked real well. You need to heat them a little to make the bends. They were 3/4" wide.
Rich
Thats what the originals were of on my 24 Coupe.
Mine were nailed on and the nails were countersunk in the molding and the holes were filled in and then painted over.
I tried to send you an email that I am parting out a couple . Did you get it? It has the parts you need. Dan
When I originally restored the coupe in 1976 I also used Al strip but I used screws and then covered with filler. It has held up quite well.