I'm putting together the hubs, spindles, etc. on my front axle. This has Simplex wheels and hubs, with Timken bearings. When I disassembled them, there were no seals! I've posted a few pics of these, exactly how they looked when disassembled (except cleaner).
Any suggestions?
Thanks.
David, the inner seal next to the spindle is there, albeit a bit deformed. I am not familiar with Simplex wheels, but usually the hub cap is the seal. The cap is filled with grease and when installed act as a lubricant reservoir and dust seal.
Hope this helps.
Allan from down under
It appears the shoulder for the grease seal is there on the bearing. You probably just need a new seal.
So I'm in need of the inner seal, either neoprene or the old styles felt? I think I've seen these on the websites for T parts...
Thanks again.