Model A Drum to Model T spindle

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2013: Model A Drum to Model T spindle
Top of pagePrevious messageNext messageBottom of page Link to this message  By Kevin Holland, Utah on Saturday, June 29, 2013 - 05:00 pm:

I have been told that a Model A drum can be put on a Model T spindle. I am building a trailer and want a spare. Do you need to change the races in the Model A drum, or can you use the model A drum and bearings on the Model T spindle. Any help would be appreciated. Kevin.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Saturday, June 29, 2013 - 05:14 pm:

This should help. You have to be register and logged on to see the photos but you should be able to read the text.
http://fordbarn.com/forum/showthread.php?t=88191


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jim Sims on Saturday, June 29, 2013 - 05:16 pm:

In my pile of parts I have a set of spindles that have been modified. They have been shortened and re threaded. Using the A bearings they both have the same thread.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Saturday, June 29, 2013 - 06:11 pm:

Model A outer's aren't threaded. They slip on and the lock tab washer and nut keeps them in place.


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration