Hi all! anyone know where I can get the rear window regulators for a 24 tudor sed ? thanks. Ken
You might try Model T Haven in Kansas. http://modelthaven.com/
Ken, can you post a picture of the one you want? there are a few different types and I have several styles. Thanks Joe
Hi Joe! when I got my t this is the only part of the regulators that came with the car.I do have the wood for both sides. thanks. Ken
Ken, Those are the pot metal pods, I think Bob Scherzer in Michigan has made some out of brass, langs use to carry them, I have some of the original's but some have a bolt hole broken off, I will look to see what other ones I have that would work for you. Joe
The good thing about those is that they work on either side. KB
thanks for the help guys. Ken
Ken: Did you find your window regulator? I picked up a '24 wooded door at Hershey and I'm sure now it is a sedan front passenger door. It has a decent screw type window regulator. rstinchcombATgmail.com (replace AT with @)
Rich, I did get a regulator gear housing from Bob Scherzer at Hershey. I still need the mounting plate with arm as pictured for the left quarter. not sure but I think the mounting plates are side specific thanks for keeping me in mind! Ken
Ken
Do you know if the rear gear boxes are the same as the front?
Thanks
Roger, I recall someone on the forum saying that the gear boxes are the same for doors and quarters, but not 100% sure. I do know you just flip the gears for left or right. Ken
My 1925 Tudor had all the same.
I have a full set,all rebuilt,but they are not cheap.