I found my new bushings for the fan hub.
The bolt going thru the hub...just press it out?
When It's all back together,take out the small screw and fill with oil? Or put some grease in it?
Fred,
There are different opinions on lubrication of the fan hub. Here is a past thread:
http://www.mtfca.com/discus/messages/179374/209786.html
Probably either way you will get oil or grease slung around the inside of the hood. The cleanest solution is to use the ball bearing kit or just leave the fan and/or fan belt off because it is not needed most or the time.
Jim