Winfield S-R down draft carb.

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2013: Winfield S-R down draft carb.
Top of pagePrevious messageNext messageBottom of page Link to this message  By Les VonNordheim on Friday, August 30, 2013 - 03:06 pm:

What's a Winfield S-R carb. worth? How desirable are they? The carb. looks complete and is not corroded. It been in dry storage for a long time and not soaking in water.

I do not have a use for it........get in to too much trouble already for running a water pump, Synthetic oil and distributor.

Thanks,
Les


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mike Robison on Friday, August 30, 2013 - 03:12 pm:

$600 if you find the right guy, $100-300 is typical. It also depends if it is a matched carb or a put together. Sometimes carb size and whether it is an up or down draft plays a role on the value. Bottom line... what ever makes you and the purchaser happy! good luck!


Top of pagePrevious messageNext messageBottom of page Link to this message  By Les VonNordheim on Friday, August 30, 2013 - 09:02 pm:

Thanks Mike for your guidance. Sounds like $250.00 at a swap meet is about all I can expect. Possible could do better on e-bay?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Terry Woods, Katy, Texas on Friday, August 30, 2013 - 09:29 pm:

Give it a chance on Ebay and set $250 as the opening bid and see what happens. There is an S-R on Ebay presently. Check it out.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ricks - Surf City on Friday, August 30, 2013 - 09:34 pm:

Look at the completed sales, too, Les. That's probably the most desirable carb, depending on the size. Is it A, B, or bigger?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ed in California on Friday, August 30, 2013 - 10:33 pm:

http://www.ebay.com/itm/Vintage-RARE-Ford-Model-T-Winfield-Carburetor-/350865068 642?pt=Vintage_Car_Truck_Parts_Accessories&hash=item51b1301262&vxp=mtr


Top of pagePrevious messageNext messageBottom of page Link to this message  By Les VonNordheim on Saturday, August 31, 2013 - 12:19 am:

Thanks for the great guidance. Rick, is the carb marked A or B?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ricks - Surf City on Saturday, August 31, 2013 - 12:30 am:

Yes, the size should be embossed on the two major assy. The A is about 1" throat, and the B 1 1/2". The one linked by Ed is a B.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ed in California on Saturday, August 31, 2013 - 08:36 am:

The sizes are listed in this text from NWVS, but there are Winfield's that have different opening sizes than those that are listed belonging to the corresponding letters and numbers.

http://www.nwvs.org/Technical/2104WinfieldHV.pdf


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration