Mitsubishi alternator for model t

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2013: Mitsubishi alternator for model t
Top of pagePrevious messageNext messageBottom of page Link to this message  By Michael Seibert on Wednesday, November 06, 2013 - 07:07 pm:

I know they used to be available does anyone know where I can find one


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jack Daron - Brownsburg IN on Wednesday, November 06, 2013 - 07:54 pm:

Try a junk yard?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ken Kopsky, Lytle TX on Wednesday, November 06, 2013 - 08:21 pm:

That's like asking where can I buy a Ford. :-) No mention of size or capacity.

When I built my "Kenbota", I used a 40A Mitsubishi alternator from an 87 Subaru Justy. It's about 5" in diameter and V-belt driven.



Top of pagePrevious messageNext messageBottom of page Link to this message  By Tommy black on Thursday, November 07, 2013 - 06:55 am:

I would like to see the whole Kenbota picture please


Top of pagePrevious messageNext messageBottom of page Link to this message  By keith g barrier on Thursday, November 07, 2013 - 10:01 am:

The last Mitsubishi alt. I saw on a T had left the owner on the side of the road with no way to be repaired till it was towed home. KB


Top of pagePrevious messageNext messageBottom of page Link to this message  By Willie K Cordes on Thursday, November 07, 2013 - 11:35 am:

Michael, if you have a 1919 T or later, Becker has one that fits in the place of the generator with no modifications. Hook the battery wire to it and go. Price is cheaper than most generator repairs.
They advertise in the "Model T Times" International club car magazine.


Top of pagePrevious messageNext messageBottom of page Link to this message  By neil obrien on Thursday, November 07, 2013 - 11:43 am:

Gear drive 6 or 12 volt in Lang's cat.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob Jablonski on Thursday, November 07, 2013 - 12:23 pm:

Becker's drive gear screws onto armature, not pinned like the others & won't fall off.

Darrell Becker : 1-419-577-2341


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob Jablonski on Thursday, November 07, 2013 - 12:27 pm:

Past discussions

http://www.mtfca.com/discus/messages/331880/379972.html?1376886176


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob Jablonski on Thursday, November 07, 2013 - 12:37 pm:

If I have the wrong phone contact, here's his e-mail : mralternator66@yahoo.com


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ken Kopsky, Lytle TX on Thursday, November 07, 2013 - 03:54 pm:

For Tommy -


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration