I can't seem to find the thickness of the body bracket on the rear cross member of the pre 15 frames. "All the same" gives the length of the bolt for the front four, but only says the rear bolts are longer. The measurement of an original bolt--under the head length--or thickness of the bracket at the mounting hole would be a great help. Thank you very much.---Len
That would be pre '14. Sorry.
I measured the ones off my 13 and they are 7/8 inch thick,where the bolt goes through. The body bolts were 7/16 and had hex heads with castellated nuts/cotter pin. I would guess about 1 1/2 inch long.
Jack--Thank you very much. I am making a couple for a friend, and I will be sure to make them long enough, and drill the cotter pin hole after we fit them up.