3321 Clutch Plate: $35.00, Price reduction for multiple orders of plates ( I have more than what is in the picture. Not shown in any catalog. Will contain screws and clutch shift. Please include $13.45 shipping.
Dave Huson, 2116 Charro Ave. Longmont, Co. 80504
Dave- I just sent you an e-mail. Dan
Still have some PRE 26 clutch plates left, more than is in the picture.
I still have a lot of clutch plates left.
One or two 26 clutch plates have come in. If you need one get one while they last.
I'll buy a 26 if you still have one. PM sent
Dave : I need a set of the shouldered bolts for the '26-'27 drive plates. Do you have any extras? Bruce
Bruce Compton, I do have 26 shouldered drive plate screws (bolts) I will see how many sets I have and let you know.
I am need of a 1926-27 clutch plate (driven plate) for my 27 roadster. please reply, if you have a plate available
Thank you firstname.lastname@example.org
interested in acquiring 3 good clutch fingers. if you have driven plate with same, i will take one. thanks.
Stuart; I have many clutch plates with the fingers left. In fact I have two more to ad to the pile.
It is handy to have an extra driven plate around. I bought one at Hershey and last year and later used it to check and adjust the fit of one of the current reproduction U-joints.
The front square end of the U-joint was too big to fit in the back of the plate, so I had to do some grinding on the corner chamfers and the faces to get it to fit properly.
Here are two more face plates that have to be added to the pile. wouldn't it be easier to just switch plates. I looked at a couple of plates and it looks like a lot or work and TIME to just switch fingers. Time is the killer on restoring Cars. So many around here start to restore a T and then lose interest.
Another Clutch Plate gone but I have plenty More.
i am changing the fingers out with the engine and transmission in the car. in an earlier post i stated that a finger broke loose and another had a crack in it. fortunately no other damage was done and i was able to remove the two other fingers without a problem. with the hogshead off of course.
I am currently out of 26 clutch plates but do have some more coming in. Watch for new ads.