Carb Tool: $29.00. this tool allows you to get behind the carb to tighten the bolts that hold it to the intake manifold. The socket on the other end is to tighten the three bolts that hold the generator. The Tool is one that I use a lot. If you have a generator on your car this makes tightening the bolts on the carb a LOT EASIER. Both sockets show no wear and the tool is ready to use, not just hang on the wall. The socket that you use on the carb bolts is 9/16 and the generator bolt socket is 5.8".
Dave Huson, 2116 Charro Ave. Longmont Co. 80504