Looking for a pair of brake rod supports for a 1915. Needing the ones where the re-enforcement stops just prior to the bend and the arm itself has no re-enforcement.
I have an original pair. They are right and left, but the one on the right is a bit later as it has one round and one square hole, which won't show once the correct square head bolt is installed. The one in red primer is excellent except for the rolled end where it was welded. It's decent but will need some additional work. The other one has only very light surface rust; not pitted, and the rolled end is good. $90 postpaid.
Sent you an email! I will take them!
Sold to Scott; thanks MTFCA!