A few weeks ago I bought second hand a set of RMB and a set of AC Brakes.
As it was second hand the sets were not complete but I did pay a fair price.
Now I am looking for the missing parts or a way to make them.
The RMB set is about complete except for the rods and the bolts to attach the brakes to the rear axle. Can someone tell me the length of the 1/2" bolts at the rear.
The AC brake set is missing the cable linkage from the pedal to the brakes. Are there good pictures of this linkage.
Picture in attachment are the bolts I am looking for.
2 inches, fine thread. Should have about 3/4 to 7/8 approx. inch non threaded at the one end. Shim with washers as needed on the back side.
Thanks Mark, great info.