26-7 steering column Question

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2014: 26-7 steering column Question
Top of pagePrevious messageNext messageBottom of page Link to this message  By lorenzo leon on Saturday, June 07, 2014 - 07:44 pm:

I have a mix of parts and need to get all the 26 parts from these,#1 on left T946 spark? ..T-947 is gas? there are longer than the other 2 on right] are they for diferent carbs. and are the column braket[last on right] labeled right?... the bottom brakets I have where the pitman goes .. are T936C .thank u lorenzo


Top of pagePrevious messageNext messageBottom of page Link to this message  By Don Booth@ Bay City, Mi on Saturday, June 07, 2014 - 08:29 pm:

All three 26 and 27 T's have 3 arms on the steering shaft. The left is timing the other two is for carb's. The shafts were set up for both the vaporizer (close to the firewall)or the NH thru the block linkage. They also have the 2nd from the right spreader on the shafts. Hope this helps.


Top of pagePrevious messageNext messageBottom of page Link to this message  By lorenzo leon on Sunday, June 08, 2014 - 09:26 am:

Yes it does ,Thank you ..The bottom bracket is the only part #T-932C I cant seem to get out of the parts book.I think this is the problem I got
[the number I got up top is wrong] its NOT T-936C It is T-932C
Thank again ..Lorenzo


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jerome Hoffman, Hays KS on Sunday, June 08, 2014 - 11:41 pm:

Does any one know when the flange at the bottom of the column changed to the square one from the round one?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Dan Treace, North FL on Monday, June 09, 2014 - 12:26 am:

The square flange change when the new Improved Car Body styles, Aug 1925 came in production, the column needed to be changed for the new lower bodies.


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration