Anyone have or know of anyone that may have a Carburetor rebuild kit for a 1928 Carter Carb on a 1928 Chevrolet? If all else fails anyone know of someone with a good whole Carter?
http://www.ebay.com/itm/Reman-Carter-1-Barrel-Carburetor-Carb-RJH-08-1929-1930-1 931-Chevy-Chevrolet-/171380371185?pt=Vintage_Car_Truck_Parts_Accessories&hash=it em27e710eef1&vxp=mtr
The filling station has most of those parts.
The 1928 had the RAKX-O, this is different to the 1927 and 29.
Gary Wallace in St. Louis has that. 3142931991
Thank you all, I will get busy making calls.
John, your right ordered a kit from Dick's and was sent one for the '29 I believe. All it had was some gaskets and a needle and seat. The 28 has a series of jets in addition to the needle and seat, the 29 apparently was a lot less complicated carb. Perhaps they learned something...
I think what you are after is the carburettor multi jet. Filling Station part number af-25. The other gaskets you have may work but be careful as a lot of replacement kits provide a needle with a rubber tip, this is ok if you have a mechanical or electric fuel pump although can get stuck if being fed from a vacuum tank with less then 1 foot head.
Yes multi jet is it.
Found a kit with jets at: The filling Station
$211.00 not cheap but worth it if we can run the truck with the correct carb. Jets are very complicated machining, understand the cost.
Thanks for your help...