I just picked up an E-Z Power PTO
. Can anyone describe the function. Does the pulley always rotate even when driving? Is the square end shaft supposed to retract? (mine does not). Can you "turn the pulley on and off" ?
Does anyone have an extra coupler and/or mounting brackets.
Thanks any info is appreciated.
Can someone describe what is a E-Z Power PTO? Is it a Model T part?
Norm
Norm, Check out the two links I gave to past discussions on the E-Z Power PTO on this recent thread.
http://www.mtfca.com/discus/messages/411944/471370.html?1408236733
Tom the input shaft is stationary but the output shaft will
Disengage by loosening the set screw on the collar on the
Output shaft and pulling out on the pulley this disengages
The gears for when your driving
I forgott to mention when you disengage or. Engage always
Re tighten the set screw on the collar otherwise you could
Damage the gears
When I had mine apart I took these dimensions of the connector between the engine and the drive shaft. Not the best representation but it does give you what you need to build one...I think?
I can't get the next two pictures to upload?
Here they are.
Here is a print I made up off of Lance's dimensions. I used his dimensions to build one for mine. Thanks Lance!