I looked at an engine today and the hogshead has ears
For frame brackets question is is this ford or aftermarket
Thanks in advance
The '26/'27 hogs head has ears on top that are used to bolt the hogs head to the rear of the engine block and they also have braces that run to the frame. Much better set up than the earlier cars.
Another question will this hogshead work ok on any trans.
With the wide brake band ?
The Improved Car ('26-'27) hogshead only works on the wide brake Improved Car transmission, as the pedal spacing is wider too.
Note threaded holes in the end of the block to mate with the two bosses with holes on the Improved Car hogshead.