I have my running board,rear fender and apron painted and ready to install but not sure what goes on in what order. it`s a 24 tudor. thanks, Ken

Apron,running board,and fender.

And don't forget the spacer blocks mentioned at: The “Model T Ford Service” book “T-1” which is available online at: http://mtfci2002.readyhosting.com/manuals/Model_T_Service_Manual/mtsm.html It starts on page 39 paragraph 131 "Installing running boards and shields" and then you skip to page 33 para 144 "installing rear fenders."

Respectfully submitted,

Hap l9l5 cut off

I have found the use of long taper punchs 5-7" or longer work great when installing fender aprons and running boards.
You can use screwdrivers also but taper punches work better when the holes are slightly off. Or so I've found anyway.