Assembling a magneto horn

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2014: Assembling a magneto horn
Top of pagePrevious messageNext messageBottom of page Link to this message  By Allan Bennett - Australia on Wednesday, October 15, 2014 - 10:08 pm:

I bought a nice magneto horn for my 1917 shooting brake. It had been taken apart, cleaned and re-assembled. I took it apart again to check and then re-paint it. Should there be gaskets both sides of the diaphragm, one side only and which side, or none at all?

Allan from down under.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Tom Bergmann Sydney - Australia on Wednesday, October 15, 2014 - 11:02 pm:

Hi Allan
I think its 2 very thin paper.
See this link
http://www.mtfca.com/discus/messages/179374/217727.html
Tom


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jack Daron - Brownsburg IN on Wednesday, October 15, 2014 - 11:10 pm:

I use the waxed file folders and cut my own gaskets(2)They work well and hold up.


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration