Need a quick meaurement, TT rear hub

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2014: Need a quick meaurement, TT rear hub
Top of pagePrevious messageNext messageBottom of page Link to this message  By Chad Marchees on Tuesday, October 28, 2014 - 11:16 am:

Can someone do me a quick favor and measure the bolt pattern for the spoke hub bolts on a REAR TT hub form me. I need the center to center distance from two hub bolts across from each other--hopefully should be around 5 1/2" - 5 5/8" I believe, but I need to be sure.

Thank You


Top of pagePrevious messageNext messageBottom of page Link to this message  By Henry Petrino in Modesto, CA on Tuesday, October 28, 2014 - 11:24 am:

All have to use right now is a tape measure, so accuracy may not be perfect, but I make it 5 3/4".


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jim Thode Chehalis Washington on Tuesday, October 28, 2014 - 11:33 am:

I get 5 11/16"


Top of pagePrevious messageNext messageBottom of page Link to this message  By Steve Jelf, Parkerfield KS on Tuesday, October 28, 2014 - 11:36 am:

I get 5 5/8".


Top of pagePrevious messageNext messageBottom of page Link to this message  By Henry Petrino in Modesto, CA on Tuesday, October 28, 2014 - 12:34 pm:

I didn't know there were so many variations of the TT hub. :-). :-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bob Gruber- Spanaway, Wash. on Tuesday, October 28, 2014 - 02:12 pm:

Mine measures 5" even.
Did they change over the years?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Ken Kopsky, Lytle TX on Tuesday, October 28, 2014 - 02:36 pm:

Five inches is the standard car hub, not a TT as requested.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Tim Morsher on Tuesday, October 28, 2014 - 04:17 pm:

Henry is right, 5 3/4"


Top of pagePrevious messageNext messageBottom of page Link to this message  By Dennis Seth - Ohio on Tuesday, October 28, 2014 - 04:29 pm:

I guess if you drill slots in your wheels it will fit all of the above measurements :-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By Chad Marchees on Tuesday, October 28, 2014 - 06:34 pm:

Yea Seth, that's what I am thinking, LOL. NOT!!!.

I needed to get a new set of wheels for my T-tractor and found some new wheels that were what I was looking for and an excellent price plus free shipping, but that was ending soon, so I had to get the order in. And I was at work so no measure on my own, plus no knowing if mine was modified from stock pattern.

What I will probably do is weld up where needed on the hub, grind away on the other side and press in some real wheel studs. But I wanted to get as close as I could to start with.

Thank you to all that helped me out


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration