Throttle / Spark advance levers

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2015: Throttle / Spark advance levers
Top of pagePrevious messageNext messageBottom of page Link to this message  By Rod Barrett - Anderson, IN on Tuesday, March 10, 2015 - 05:30 pm:

Jay in Northern CA wrote in 2011 "Mike, This clamp installed on your engine side steering column will tighten up your limp levers and keep them where you put them. You can get one from most of the T parts dealers."

Does anyone know where to buy it and what is the part number?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Strange - Hillsboro, MO on Tuesday, March 10, 2015 - 05:36 pm:

https://www.modeltford.com/item/3524-25T.aspx

:-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By Steve Jelf, Parkerfield KS on Tuesday, March 10, 2015 - 05:39 pm:

https://www.modeltford.com/item/3524-25T.aspx


Top of pagePrevious messageNext messageBottom of page Link to this message  By Steve Jelf, Parkerfield KS on Tuesday, March 10, 2015 - 05:40 pm:

Is there an echo in here?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Chris Barker, Somerset, England on Tuesday, March 10, 2015 - 06:12 pm:

Is there an echo in here?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Kenneth W DeLong on Tuesday, March 10, 2015 - 07:38 pm:

At maybe $20.00 with shipping i would think it easy to make one?? Bud in Wheeler,Mi.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Kenneth W DeLong on Tuesday, March 10, 2015 - 07:40 pm:

At maybe $20.00 with shipping i would think it easy to make one?? Bud in Wheeler,Mi.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Tony Bowker, Ramona, CA on Tuesday, March 10, 2015 - 07:50 pm:

Another echo

Yet another echo...


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Strange - Hillsboro, MO on Tuesday, March 10, 2015 - 08:06 pm:

https://www.youtube.com/watch?v=CahNAauFgys

:-O


Top of pagePrevious messageNext messageBottom of page Link to this message  By Kenneth W DeLong on Tuesday, March 10, 2015 - 09:43 pm:

Nope,Only 1 self induced echo and the message is that i would make it myself for about 3 or 4 bucks and get the centers right. Good idea though and my Grandsons 15 needs one! Bud in Wheeler,Mi.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jay - In Northern California on Tuesday, March 10, 2015 - 10:19 pm:

Here's links to two different kind of these units in the original boxes I have posted under Accessory Of The Day a while back.


http://www.mtfca.com/discus/messages/118802/168343.html

http://www.mtfca.com/discus/messages/118802/142288.html


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Tuesday, March 10, 2015 - 10:36 pm:

File the notches on the quadrant and wrap some heavy sash cord around the shaft and rods. The one shown in above photo, looks like the screws will rub a grove in the shaft.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Gary H. White - Sheridan, MI on Thursday, March 12, 2015 - 05:42 pm:

"...keeps the front wheels from wabbling." ????


Top of pagePrevious messageNext messageBottom of page Link to this message  By Gustaf in Idaho on Thursday, March 12, 2015 - 11:59 pm:

I have one of those on my T, it is great, and my time is worth more than the cost of making one, by the time you get the blocks cut and drilled and wing nuts and bolts rounded up. The one thing that I have noticed that it is probably made of oak as it swells when the humidity gets above 20%, but that does not happen often here, so it is not that big a problem.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Rod Barrett - Anderson, IN on Sunday, March 22, 2015 - 11:48 am:

OK. After ordering and finding the https://www.modeltford.com/item/3524-25T.aspx was on back order, I decided to take a different approach. I discovered the arm had worn down, so I welded a hump in it's place. Works GREAT! I just have to remember to lift the levers when changing position.


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration