Does anyone still sell the original style Ford Part T-8892-CX Dimmer Assembly or a suitable substitute?
I have a few originals, Bob
They were never reproduced as far as I know. Only originals survive but they generally are OK unless just totally rusted laminations prevail. There were 2 physically different ones. The only difference is the length of the wires that were attached to them. If you find one with long wires (well over 1 foot) then it was the earlier version that mounted to the engine side of the firewall. If you find a later one with shorter wires (about 6" or less) then it mounted behind the metal instrument panel behind a dummy ammeter block off plate.