Right Hand Drive Carb Rod

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2015: Right Hand Drive Carb Rod
Top of pagePrevious messageNext messageBottom of page Link to this message  By Larry Dodson on Sunday, July 05, 2015 - 01:34 pm:

Does anyone have a right hand drive Model T. I need to make a throttle rod and it would be nice to have a photo so i know where to start. Thanks Butch


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Strange - Hillsboro, MO on Sunday, July 05, 2015 - 02:10 pm:

A Google search for "right hand drive MTFCA" revealed these older threads:

http://www.mtfca.com/discus/messages/29/34189.html?1187357368

http://www.mtfca.com/discus/messages/29/46758.html?1201796166

:-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By Larry Dodson on Sunday, July 05, 2015 - 02:44 pm:

Thanks Mark


Top of pagePrevious messageNext messageBottom of page Link to this message  By Allan Bennett - Australia on Sunday, July 05, 2015 - 10:22 pm:

Larry, you will need to modify the throttle arm on the carb butterfly. The linkage hole is in line with the butterfly shaft and the idle adjust boss, a straight line through all three points. Then the linkage goes around behind the intake. It is bent in U shape to do this. You will have to play with it to get full throttle. Towards the end of the travel, nothing much happens with more movement of the lever.

Hope this helps.

Allan from down under.


Posting is currently disabled in this topic. Contact your discussion moderator for more information.
Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration