I have been using a home made engine test stand to mount Model T engines but now want to buy a regular engine stand that can rotate. I would like to buy one best suited for a Model T that is well constructed but not priced out of this world. Looking for suggestions.
Richard, i bought one from Jegs not that long ago, great prices and built very well. Then all you have to do is buy the adapter plate that the vendors sell and you should be good to go.
I have a 3 leg stand like the one John shows, but if I had to do it over again I would buy a 4 leg stand, they are much more stable.
If you get two short pieces of large pipe, one that will fit inside the other, you can make your own rotating adapter.
Here are my home made stands. The green one is for the left side and the Blue one is for left and right.