Can anyone confirm or deny that these castings are for a 2 cylinder Ford
The part on the right sure looks like a crank case for a 2 cylinder Ford. If you had a photo or two from other angles it would be easier to tell. Not sure what the part on the left is.
More pictures as requested thanks Peter
They are both 2-cyl engine castings. The part on the right is the upper half of the crankcase. The part on the left is the bottom cover of the crankcase that contains half of the lifter and camshaft bores.
They appear to be unfinished as there are no thru-holes for the bolts, tapped holes to attach the cylinders, and the bottom cover isn't bored for the cam and lifters. It's possible they are older reproduction.
Hi Peter. These are for a 10 hp motor. I'm interested in them and have sent you a PM. Andrew
Hi Andrew sent you a PM peter