Langs spindle bushing resizing

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2016: Langs spindle bushing resizing
Top of pagePrevious messageNext messageBottom of page Link to this message  By Douglas Keppler on Monday, May 09, 2016 - 06:50 pm:

well, I bought the spindle bushings from Langs and they wound up being .010 over size like everyone was saying...they would have split the spindle if I forced them in. I installed a 1/2" bolt through the bushing with a nut to tighten with about an inch and a half of the threads protruding, installed the protruding end in the drill press and used emery cloth to take them down to size then pressed them in with the vise. Worked beautifully!


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration