Brake neutral lever

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2016: Brake neutral lever
Top of pagePrevious messageNext messageBottom of page Link to this message  By John E Cox on Friday, September 09, 2016 - 12:42 pm:

The spring in my brake lever is broken.
Is there an easy way to replace it or is a new lever required?


Top of pagePrevious messageNext messageBottom of page Link to this message  By Bill Severn - SE Texas on Friday, September 09, 2016 - 01:20 pm:

John,

I think the vendors sell a quick-fix spring that mounts out of sight below the floorboards.

Bill


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Strange - Hillsboro, MO on Friday, September 09, 2016 - 02:16 pm:

https://www.modeltford.com/item/3463R.aspx


Top of pagePrevious messageNext messageBottom of page Link to this message  By Royce in Dallas TX on Friday, September 09, 2016 - 02:53 pm:

Here's what I would get:
https://www.modeltford.com/item/3463.aspx


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jim Eviston on Friday, September 09, 2016 - 04:09 pm:

And, John, having both the original and 3463R would'nt hurt anything. Use needle-nose vice grips clamped on good when you pull that little devil up to hook on the rod. Otherwise, you might be looking for it.


Top of pagePrevious messageNext messageBottom of page Link to this message  By John E Cox on Friday, September 09, 2016 - 09:02 pm:

Thanks Royce and Mark.
I will order both and go from there.
John


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration