Need some input.

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2016: Need some input.
Top of pagePrevious messageNext messageBottom of page Link to this message  By Tim on Friday, November 11, 2016 - 12:06 pm:

For those of you running overhead valves - do you have a cold problem? My car won't move an inch when it's cold regardless of the choke setting. Once warmed up it goes like a scalded cat but it takes 2+ minutes of idling before it will move. The story of my plight and photos are here on my website: http://tfoye.com/MTE/GreenThunderbolt.htm It's been re-jetting to just about every size imaginable and various warming techniques applied.

If you have a solution or a better carburetor I would like to know what you're using.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Friday, November 11, 2016 - 12:38 pm:

The Chevrolet used a hot air pipe that came off a stove on the exhaust pipe.


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration