Oiling

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2017: Oiling
Top of pagePrevious messageNext messageBottom of page Link to this message  By Philip thompson on Saturday, March 04, 2017 - 09:06 pm:

I am getting my 24 touring ready for a test drive
The car had a mag post oiler that was plugged off.
I made a hollow bolt and a new as line I don't how much oil it flows but it can't hurt any thing. I also pulled the inspection plate it's been sitting for
Months and all of the pan dips were full. Every thing looks good wish me luck. Philip


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Strange - Hillsboro, MO on Saturday, March 04, 2017 - 09:18 pm:

Sounds good, post some pics!

Oh, and good luck!


Top of pagePrevious messageNext messageBottom of page Link to this message  By Philip thompson on Saturday, March 04, 2017 - 09:29 pm:

I will try a pic from my phone


Top of pagePrevious messageNext messageBottom of page Link to this message  By John Zibell, Huntsville, AL on Sunday, March 05, 2017 - 10:59 am:

Phillip, If you haven't done an oil change and just dropped the inspection pan, pour about half a quart back in to fill the dips. If not you will run dry for awhile until oil gets back up front.


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration