Steering gear to frame bracket ?

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2017: Steering gear to frame bracket ?
Top of pagePrevious messageNext messageBottom of page Link to this message  By Glenn W. Beers on Monday, March 27, 2017 - 09:19 pm:

Do I have the wrong frame bracket ? When trying to install the pitman arm on steering shaft the spark rod is to close to steering shaft. The end of spark rod keeps the pitman from seating on the taper of the steering shaft. The bushing in the bracket is 7/8" OD X 3/4" ID.


Top of pagePrevious messageNext messageBottom of page Link to this message  By rick howerton on Monday, March 27, 2017 - 11:06 pm:

The quadrunt that your spark lever slides on might be bent towards the dash a little letting your rod to go to far down, I had that problem one time I sawed the end of the rod off just enough that cleared the pitman.


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration