Fastener for oversize wishbone socket stud holes

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2017: Fastener for oversize wishbone socket stud holes
Top of pagePrevious messageNext messageBottom of page Link to this message  By Dan Treace, North FL on Wednesday, April 05, 2017 - 11:21 pm:

Well, when the old wishbone is worn out,....
and studs fall away,....
why not use something handy to hold things together?



Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Strange - Hillsboro, MO on Wednesday, April 05, 2017 - 11:28 pm:

Yikes! Looks like it's been that way for a long time. :-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By John Noonan - Norton, MA. on Wednesday, April 05, 2017 - 11:33 pm:

With a little adjusting, it seems a good hard stick would work perfectly well instead of safety wire. :-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By Peter Borland. Bathurst. NSW. Australia. on Thursday, April 06, 2017 - 12:02 am:

It's a Boy!!!


Top of pagePrevious messageNext messageBottom of page Link to this message  By Dallas landers on Thursday, April 06, 2017 - 09:52 am:

How many penny's will fit in there??? Save the square nut!
Maybe those are thumb screws for quick adjustment.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Erik Johnson on Thursday, April 06, 2017 - 10:09 am:

The wishbone may be secure but two fenders keep falling off…..


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration